Last updated on 22th May, 2025
[Special Notes]
Before using EasyControl Pro service, please carefully read and comply with EasyControl Pro Service Agreement, EasyControl Pro Privacy Policy, and other applicable separate agreements, service rules, etc. for the use of certain services (collectively referred to as "this agreement").
This is a valid agreement between user (referred to as “you”) and Hangzhou SwiftReach Technology Co., Ltd.(hereinafter referred to as "SwiftReach”, “we”, or “us”) regarding EasyControl Pro service (hereinafter referred to as "the service”).
You shall carefully read and fully understand the terms of this agreement, especially the terms regarding your significant rights and interests, including the terms that exempt or limit the liability of SwiftReach, terms that limit user rights, terms regarding dispute resolution and jurisdiction, separate agreements or rules for the activation or use of a certain service, as well as terms in bold, underlined, or in other forms for your attention. When you fill in information, read and agree to this agreement and complete registration or activation procedures as instructed on the relevant page, or when you actually use the service in any way permitted by SwiftReach, it means that you have fully read, understood and accepted all the contents of this agreement, and this agreement is a legally binding contract between you and SwiftReach. If you have any questions about this agreement, you may contact our customer service at any time, and we will try our best to give explanations. You shall not claim that this agreement is invalid or request to revoke the agreement on the ground that you have not read this agreement or have not got an answer to your inquiry.
Under this agreement, we presume that you are a legal subject with full capacity for civil rights and the capacity to act commensurate with the civil actions you are engaged in, and you are not the subject (restricted subject) of any trade restrictions, sanctions, or other laws or rules imposed by any country, international organization or territory. If you do not meet the aforesaid conditions, please stop the follow-up operation and seek solutions as follows: (1) If you are not a user in China mainland, please find service instructions and sign the relevant agreement through the website or software established by SwiftReach in your local area; (2) If you do not have full capacity for civil conduct due to factors such as age, please inform your guardian, read and sign this agreement and use the service under the guidance of your guardian; (3) If you are a restricted subject, please initiate an application for the use of the service after the relevant restriction disappears or is lifted. If you are not an aforesaid eligible subject (or haven’t obtained the consent of your guardian) but continue to sign this agreement, SwiftReach has the right to refuse or terminate the service, and cancel your account after verifying the relevant circumstances, and you (and your guardian) shall be responsible for the relevant losses.
[Text]
SwiftReach refers to Hangzhou SwiftReach Technology Co., Ltd.and/or its affiliates, also referred to as "we”, “us” in this agreement.
User refers to a legal entity that is eligible to use the service and use it in accordance with this agreement, also referred to as "you" in this agreement.
This agreement includes EasyControl Pro Service Agreement, EasyControl Pro Privacy Policy, and other separate agreements, service rules, etc. for the use of certain services.
Due to the fact that the software needs to be optimized and upgraded from time to time, you understand and agree that SwiftReach will revise or update this agreement from time to time as needed for service operations, and will publish or notify you by website notice, website message, e-mail, or in other written forms. The revisions or updates will take effect from the date specified in the relevant announcement or notice (or, if not specified, in 7 days after the date of the announcement or notice). If you do not accept the revisions or updates, you must immediately stop using all the services of SwiftReach and notify us in written form. We will handle the termination of this agreement with you in accordance with the previous content.You are aware and acknowledge that servers of the service are deployed in countries that fully recognize the General Data Protection Regulation (GDPR), such as Singapore and Germany. If you have any questions about how we deploy servers, you may contact us through the contact information listed in Chapter VI, and we will respond to you within the specified time period after verifying your identity in accordance with the applicable laws in your region. If you connect overseas smart devices (such as network camera) to EasyControl Pro platform, or use or access the service overseas, it may involve cross-border transmission of personal information of the personal information subject. Before conducting cross-border transmission of personal information (if any), you shall comply with local personal data/privacy protection laws, regulations, and other regulatory requirements.
You are solely responsible for all consequences and responsibilities caused by your actions in violation of laws, regulations, departmental rules or national policies. If your actions adversely affected us such as infringement, violation of law, etc., you are liable for our direct or indirect losses resulting from your actions.We will provide various Internet and communication related value-added services, including free and charged services. We reserve the right to charge service fees, change fee rates and charging methods. If a service is changed from free to paid, we will notify you in an appropriate form, and you can choose to accept or reject it. And should you accept it, you agree to pay service fees according to our fee rates. If you refuse or default on the payment, we have the right to stop the service and seek compensation in accordance with the law.
SwiftReach is committed to protecting users' personal information. If you are an individual user, we will collect, store, use, disclose and protect your personal information in accordance with SwiftReach Privacy Policy, and guarantee your rights to access, correct, delete your personal information and cancel your account. If you are an enterprise user, we will protect your business information in accordance with the law and will not disclose without your consent.
We do not provide any service to minors under the age of 14 (or the minimum age under the applicable law in the jurisdiction). If we found any account is related to or is registered by a minor under the age of 14 (or the minimum age under the applicable law in the jurisdiction), we will immediately delete the relevant account information. If we found we collected personal information of minors without prior verifiable parental consent, we will try to delete the relevant data as soon as possible.
If you are the parent or guardian of a minor under the age of 14 (or the minimum age under the applicable law in the jurisdiction), and you believe that the minor has disclosed her/his personal information to us, please contact us immediately through your local SwiftReach service phone number or e-mail address. Parents or guardians of minors under the age of 14 (or the minimum age under the applicable law in the jurisdiction) can check and ask us to delete the minor's personal information and prohibit us from using it. In cases where we collect personal information of minors with the consent of the parents/guardians, we will use or publicly disclose the information only when permitted by law, expressly allowed by the parents or guardians, or when necessary to protect the minors.
If you have any questions, comments or suggestions regarding the privacy policy in this agreement, EasyControl Pro Privacy Policy, or your personal information, please contact us by the following ways.
Email address: wangchen.tech.work@gmail.com
Telephone number: +86 18167175706
Mailing address: Room 5752, Building 7, No. 1197 Binan Road, Changhe Subdistrict, Binjiang District, Hangzhou City, Zhejiang Province, China. Recipient: Personal information protection personnel. Postal code: 310051
The service may use third-party software or technologies (including open source code and public domain code that the software may use, the same below) that have been legally authorized. If any third-party software or technology is used, we will provide the relevant agreements or other documents in accordance with relevant regulations or agreements, which may be attached to this agreement, packaged in a specific folder of the software installation package, or displayed on the open source software pages, etc. They may be shown in Software License Agreement, Authorization Agreement, Open Source Code License, or in other forms. The above-mentioned agreements, other documents and web pages in various forms are an integral part of this agreement, and have the same legal effect as this agreement. You shall observe these requirements, or you may be subject to lawsuits, fines or other sanctions brought against you by the third party or government agencies, and you shall bear the relevant legal responsibilities.
Disputes arising from using the third-party software or technologies during the use of the service shall be resolved by the third party. We assume no responsibility except for valid judicial decisions. In addition, we do not provide customer service for third-party software or technologies. If you need any support, please contact the third party.You understand and agree that the service, like most websites and Internet software, may be affected by a variety of factors, including but not limited to user causes, network service quality, social environment, etc. The service may be affected by various security issues, including but not limited to illegal use of user information by malicious users for harassment in real life; other software that you downloaded and installed or other websites you visited may contain viruses, Trojan horses or malware and threat the security of information and data on your terminal devices and affect the normal use of the service, etc. Therefore, you should strengthen your awareness of information security and personal information protection, take good care of your password to avoid losses.
It is joint responsibility of both parties to maintain the security and normal use of the website and software. We will make necessary and reasonable technical efforts prudently to protect the security of your information and data in accordance with industry standards, but you acknowledge and agree that we cannot guarantee results in this regard.
The service may contain products or services provided by third parties. When using products or services provided by third parties, in addition to this agreement, you shall also observe the corresponding third-party user agreements. We and the third party bear the respective responsibilities for the possible disputes in accordance with the scope stipulated by law and agreed by both parties.
You understand and agree that the use of the service or the acquisition of any materials or contents through the service is based on your independent judgment. Any advice or guidance we may provide regarding the ordering or use of the service does not replace your independent judgment at any time, and shall not be construed as our guarantee or warranty. You shall assume all the risks arising from foregoing behaviors, including risks arising from the reliance on the accuracy, completeness or usefulness of the content, etc., for which we cannot and will not be liable unless there is a valid judicial decision.
This agreement shall be governed by laws of the People's Republic of China, and shall exclude all the principles of conflict of laws.
This agreement is signed in Binjiang District, Hangzhou, Zhejiang. In the event of any dispute, both parties agree to submit the dispute to the people's court with jurisdiction where the agreement is signed. In the event of any conflict between a separate agreement and this agreement about the jurisdiction, the separate agreement shall prevail if applicable.
We may send you various rules, notifications and prompts and other information regarding the use of the service in one or more ways, such as website notice, website message, e-mail, SMS message, regular mail delivery, and account internal message. Once sent, such information is deemed to be delivered and binding on you. If you do not accept, please stop using the relevant services immediately and notify us in writing. If you do not receive relevant rules, notifications, prompts and other information due to incorrect information you provide such as email address, mobile phone number, or mailing address, you agree that you are still deemed to have received the relevant information and are bound by it, and that all the consequences and responsibilities shall be borne by you. If you need to notify us of any matters under this agreement, please contact us in written form through the formally published contact information, i.e., email: [wangchen.tech.work@gmail.com ].
Mailing address: [Room 5752, Building 7, No. 1197 Binan Road, Changhe Subdistrict, Binjiang District, Hangzhou City, Zhejiang Province, China.]SwiftReach’s failure to exercise, fail to exercise in time, or failure to fully exercise its rights stipulated in this agreement or as per applicable law shall not be regarded as a waiver of such rights, nor shall it affect SwiftReach exercising such rights in the future. The headings, abbreviations or definitions in this agreement are for convenience only and shall not be used as a basis for the interpretation of this agreement. If you have any questions about this agreement, please contact SwiftReach customer service center, we will give you necessary explanation or help in time.